Garage doors · Steinau range
Up-and-over garage doors: a tried-and-tested classic, carefully planned.
A single door panel swings outwards as it opens, then slides back beneath the ceiling. The principle is robust and straightforward – but space in front of the garage must be deliberately allowed for.
Tried and tested
straightforward, robust construction
Renovation
often easy to assess
Design
steel and wood-look finishes available
Drive system
can be automated for added convenience
How it works
A simple design still needs careful planning.
With an up-and-over door, the swing clearance in front of the garage must remain unobstructed. That is why we check the driveway, pavement, vehicle position and slope before recommending this type of door.
01
A straightforward door design
Few design complications and a tried-and-tested opening mechanism make an up-and-over door an appealing option for many traditional garages.
02
Versatile door panels
From understated steel designs to finishes that highlight the material, the large surface can be tailored to complement the building.
03
A good option for modernisation
Existing garages with a conventional opening can often be fitted with a new door without unnecessarily complex alterations.
04
Convenience with a door operator
Automation can be planned from the outset – including lighting, remote controls and further operating options.
Planning detail
The space in front of the door is part of the design.
While a sectional garage door rises vertically, an up-and-over door swings outwards in an arc as it opens. With a short driveway, a public footpath or a steep slope, this can be a decisive reason to rule it out.
- Keep the swing area in front of the garage clear at all times
- Check the slope and the junction with the floor
- Allow for the clear opening and frame width
- Also assess the spring mechanism, finger trap protection and the safety of the door’s guide mechanism
Choosing the right door
Three door types – three different movements.
Up-and-over garage door
A practical choice when the space in front is clear
A classic design, straightforward mechanism and a large, continuous door panel.
Sectional garage door
A practical choice for a short driveway
Opens vertically and stays within the garage footprint – with more options for insulation and panel design.
Side-hinged garage door
A practical choice for frequent pedestrian access
A single leaf can be used like a door; however, this type also needs space to open outwards.
Door automation & safety
Convenience must not mask the mechanics.
Multiple-spring systems, secure guidance and anti-trap protection are key features of modern up-and-over garage doors. The operator is selected and adjusted to suit the door’s size, weight and daily use.
FAQ
Frequently asked questions about up-and-over garage doors.
When is an up-and-over garage door the right choice?
When the driveway offers sufficient space, the traditional design suits the building and a robust, straightforward construction is preferred.
Can an up-and-over garage door be automated?
Yes. The operator is selected to suit the door’s size, weight and use. When upgrading, we check whether existing components can be reused.
What should you consider if you have a short driveway?
The swing area in front of the door must not be obstructed by a vehicle, a pavement or other obstacles. In these situations, a sectional or roller garage door is often more convenient.
Are matching side doors available?
Yes, depending on the range, side doors can be matched to the design of the garage door. This is particularly practical if you frequently access the garage on foot.
Up-and-over garage door
Is this classic design really right for your driveway?
A photo of the garage and driveway is often enough for a quick initial assessment of suitability. Precise site measurements then determine the final specification.